【奇思妙招】Are you kidding? 用啤酒罐就能增强wifi信号?!

发表于:2014-11-28 13:41 [只看楼主] [划词开启]

Boost Your WiFi Signal Using Only a Beer Can
听说过用啤酒罐就能增强wifi信号吗?来让我们看看怎么做吧




【材料

For this project you are going to need scissors, a utility knife, some adhesive putty and an empty beer can. More than one empty beer can is acceptable but don’t kid yourself, the router only needs the one.
对于这个简单的装置,需要剪刀,美工刀,一个空啤酒罐,多了也没用。


【步骤
The first step is to wash out your empty beer can, unless of course said beer is a can of Pabst Blue Ribbon. If it is PBR, promptly go drink a better beer. You really should be ashamed of yourself.
第一步是清洗啤酒罐,最好是蓝带啤酒,如果是塑料瓶装的,赶紧换一个去。

Once the can has dried, you will want to remove it’s pull tab.
啤酒罐干了之后,去掉拉环。

Only perform this next step if you have not been drinking. Using the utility knife, saw off the bottom of the can. Chances are your can will not have a red dotted line. If you see one, put down the knife…you’ve had too much beer.
用美工刀切掉开口端,剪开罐身,再将底端切割成部分相连的形状。

It’s the home stretch! You just need to attach your modded beer can to the wifi router. Hopefully no other parts of the can have actually grown back. You now have beer-fi!

现在是最后一步了。只要把你的啤酒罐模型连接到路由器上—如果没有什么要修改的,你就拥有了自己的啤酒罐路由器。



全部回复 (8) 回复 反向排序

  • 9

    点赞

  • 收藏

  • 扫一扫分享朋友圈

    二维码

  • 分享

课程推荐

需要先加入社团哦

编辑标签

最多可添加10个标签,不同标签用英文逗号分开

保存

编辑官方标签

最多可添加10个官方标签,不同标签用英文逗号分开

保存
知道了

复制到我的社团